YOUSU 3D Printer Filament Bundle, Glow in The Dark Filament Multicolor, Green, Blue, Purple and Rainbow, PLA Filament 1.75 mm, Dimensional Accuracy +/- 0.03 mm, 250g X 4 Pack

To be honest, I had not heard about Yousu before, so I was a bit sceptical about the quality I would get from their filament.Although I have been 3D printing just for 3 months, I have already tried many different filaments including the "branded" one that matches my printer and have had nothing but issues. However, this filament has managed to amaze me. From the loading to the very first print, it has behaved extremely well. Even the packaging was so nice and useful, with that zip bag that prevents moisture to be caught by the filament. The filament itself has shown an incredibly strong adhesion to the build plate and a pretty good layer bonding. I would highly recommend this filament to anyone new to 3D printing to minimize headaches associated with figuring out possible root causes.The finished prints have a wonderful matte finish with very little stringing. This one has been my first dual-colour filament and I must admit it won't be the last one. I truly love that colour change effect that makes the piece look awesome.In summary, the best filament I've tried so far, so it has become my go-to PLA of choice from now on. I would not hesitate to recommend it.

I love this filament, once dialed in it gives a great finish and the colour is loved by all who see the models printed in it.

Really worked well , very good filament, highly recommended

Nice colours, and prints nice with the defaults on my X1C, but the spool is mega wide and wont fit in my stock AMS. Had to print from the external filament dryer. It was almost too wide for that too.

I love the colours and brought it with a model in mind. It stayed on the bed nicely and the print started ok to begin with and would have looked awesome. Unfortunately it never made one full print see photos, it started stringing and promptly stopped extruding. It couldnt even print a square cube before failing. The fail points were random so believe the filament was definitely at fault. Printed a benchy in between prints to make sure my printer and settings were not at fault. Went on to print my model in black. Not sure if this is a faulty reel and used more than half the reel in failed prints. So disappointed I have other reels still on way for delivery but think I will return on arrival. Really am disappointed.

Whilst this filament produces great looking prints on my P1S and P1P printers I had all sorts of issues with it not feeding. I initially thought it was because the reels are too wide. However even though they are wide there is just enough clearance for them to turn without issue. The problem was that they are too tall (see photo - the YOUSU reel is on the left). With the lid closed the reel is touching the lid adding extra friction into the mix and causing the motors to bind. So I ran the rest of my prints with the lid open and had no more issues. So if you are using an AMS - keep the lid up :)

Always works well on my Bambi labs P1P 👍🏻

I have been getting through a lot of this filament, but have had to return two rolls recently because of debris causing blockages. At first I thought it was just one of the 3D printing issues that arrive every now and then, but tested on two different printers with two different nozzles on each but kept having the same issues. After looking at the cold pulls with a jeweller's loupe there were small black particles/debris at the clog end.

Tolles Filament mit einem schönen Farbspiel. Leider sind die Rollen breiter wie die Rollen anderer Hersteller. Sie passen zwar gerade so in das AMS vom Bambulab X1C, scheuern aber an beiden Seiten und deshalb kommt ständig die Fehlermeldung "AMS-Hilfsmotor überlastet". Das nervt und trägt auch nicht zur Haltbarkeit des Hilfsmotors bei. Entweder über die externe Filamentzuführung nutzen (nicht immer unbedingt sinnvoll), umspulen (mache ich ungern) oder einfach die Finger davon davon lassen (meine Empfehlung, wenn das AMS von Bambulab beenutztz wird).

Un acabado muy “wow” y se imprime fácil.

rien a envier au autre marque super connu, celle-ci est magnifique s'imprime bien a 210-215° résultat impeccable

El acabado no queda bonito porque el tono de doble color no es uniforme. Queda descompensado, a mi personalment me ha decepcionado mucho ya que otros filamentos de doble o multi color dejan el acabado más linesl y menos brusco con el cambio de color.

Muy fácil de imprimir, combinación de colores queda muy fluida, lo compré para probar el efecto y me a sorprendido gratamente.